Home / Products / ALLOY Engineering steels

ALLOY Engineering steels

All Alloy Engineering Steel with correct % of elements of Cr, Mo, Ni as per SAE4140, SAE4340, SAE6150, SAE8620, SAE52100 and as per BS Standard EN19, EN24, EN47, EN353, EN36C strictly as per Specifications for enabling customers to achieve the best products.




En - 19 1% Chromium- Molybdenum Steel

Chemical Composition:

C: 0.40, Si : 0.35, Mn : 0.80, Cr : 1.00, Mo : 0.40

Application :

For highly stressed components used in construction of engine & vehicles as well as back gears & pumps etc.

Sizes Available:

 

Rounds :

10, 12, 16, 20, 22, 25, 32, 40, 45, 50, 63, 70, 80, 90, 100, 105, 110, 125, 140, 150, 160, 190, 200, 210, 220, 240, 260, 300, 310, 330, 350 mm dia.

 

EN - 24 1½% Nickel Chromium - Molybdenum Steel

Chemical Composition:

C : 0.40, Si : 0.35, Mn : 0.70, Cr : 1.40, Mo : 0.40, Ni : 1.40

Application :

Specially recommended for components with a large cross section which have to be hardened & tempered & where a lot of stress is involved.

Sizes Available:

 

Rounds :

10, 12, 16, 20, 22, 25, 32, 40, 45, 50, 63, 70, 80, 90, 100, 105, 110, 125, 140, 150, 160, 190, 200, 210, 220, 240, 260, 300, 310, 330, 350 mm dia.

 

EN - 41B Nitriding Steel - 1½ % Chromium-Aluminium-Molybdenum Steel

Chemical Composition:

C: 0.40, Si : 0.35, Mn : 0.50, Ni : 0.40 max, Cr : 1.60,
Mo: 0.15 Al:1.00

Application :

For Shaft which have to be nitrided for pressing plastics which require very high surface hardness.

Sizes Available:

 

Rounds :

10, 12, 16, 20, 22, 25, 32, 40, 45, 50, 63, 70, 80, 90, 100, 105, 110, 125, 140, 150, 160, 190, 200, 210, 220, 240, 260, 300, 310, 330, 350 mm dia.

 

En - 36 3% Nickel Chromium - Case Hardening Steel

Chemical Composition:

C : 0.18, Si 0.35, Mn : 0.60, Cr : 1.10, Ni : 3.75

Application :

For case hardened parts subject to the highest stress, specially for heavy duty gears , helical gears, crown wheels, gear box gear driving pinions.

Sizes Available:

 

Rounds :

10, 12, 16, 20, 22, 25, 32, 40, 45, 50, 63, 70, 80, 90, 100, 105, 110, 125, 140, 150, 160, 190, 200, 210, 220, 240, 260, 300, 310, 330, 350 mm dia.

 

EN-353 1¼% Nickel Chromium-case Hardening Steel

Chemical Composition:

C : 0.20, Si : 0.35, Mn : 0.50, Cr : 1.30, Mo : 0.15, Ni : 1.00

Application :

For case hardened parts & as a substitute for EN-36.

Sizes Available:

 

Rounds :

10, 12, 16, 20, 22, 25, 32, 40, 45, 50, 63, 70, 80, 90, 100, 105, 110, 125, 140, 150, 160, 190, 200, 210, 220, 240, 260, 300, 310, 330, 350 mm dia.

 

SAE Grades

SAE Grades Available in :

SAE:1040, SAE:1050, SAE:52100, SAE:8620, SAE:4140, SAE:4340.

Stainless Steel

Stainless Steel is available in Magnetic & Non Magnetic type, as given below.
1. Magnetic : AISI:410, AISI:420, AISI:431.
2. Non Magnetic: AISI:304, AISI:304L, AISI:310, AISI:316

Steel is also available as per IS grade :

IS:226, IS:1875, IS:2073, IS:3748, IS:3749, IS:3930, IS:4432, IS:5489, IS:5517, IS:6529, IS:7291.

 


...Read More